View Large Images
System Configuration
Quick Installation
Datasheet

 

Home > Products > RAID Subsystem > NR710C
NR710C
Desktop 5 Bay USB3.0/FWB/eSATA RAID Subsystem
NR710C_VideoThe external desktop 5-drive multi-interface NR710C subsystem features high efficiency built-in hardware RAID processor, providing 0, 1, 3, 5 and 10 RAID levels. Among the highest-speed combo interfaces of USB 3.0, eSATA, and FireWire B, the SuperSpeed USB 3.0 connectivity delivers high-speed data transfer rate 5 Gbps, ten times the USB 2.0; moreover, RAID management can be configured completely by users in minutes using the comprehensive LCD control panel in front or through the user-friendly GUI on screen.


Quiet Fan and Automatic Detection

Netstor NR710C integrates a quiet, swappable fan module, featuring thermister controlled fan speeds and making it completely suited for use in noise-sensitive environments. The backplane on NR710C features thermal sensor and fan detection. When fan fails or temperature is above fifty degrees Celsius, users can be notified remotely by e-mail notification. And as users get closer to NR710C, they can know the error from LCD or beeping from the buzzer. The alarm can be muted from a remote GUI or by mute button on enclosure; furthermore, users can always trace the history events from GUI’s event log.


Tight Security and
Robust Structure

Each hard disk drive tray on NR710C has an individual security key lock that prevents hard disk drive from accidental pull out leading to the loss of data. Each drive tray is provided with two LEDs that indicate hard disk drive power, standby, access, and rebuilding condition. In addition, firm and solid metal structure with aluminum housing is applied with NR710C to ensure that hard disk drives are well-protected by this dedicated design, giving data complete protection from any environment.
 
Features
  • Provides most high-speed combo interfaces of USB3.0, FireWire 800 and eSATA 
  • Supports up to 5* SATA (3/6 Gbps) HDDs
  • Built-in Hardware Raid processor providing Raid levels 0, 1, 3, 5 & 10
  • Aluminum housing, anodized surface, benefits for cooling and durability
  • Backplane design for five removable SATA drive trays
  • Built-in thermal sensor for automatic fan speed controlled
  • Individual key lock of each HDD tray for physical security
  • User friendly GUI and front LCD control panel for setup, alarm mute and configuration
  • Environmental Monitoring with Power/FAN/TEMP LEDs and mutable buzzer alarm.
  • Supports offline disk roamming
Specifications
Host Interface           Combo USB3.0/ FireWire 800/ eSATA
HDD InterfaceSATA (3.0Gb/s or 6.0Gb/s)

No. of Disk(s)

Up to 5

RAID Levels

RAID 0, 1, 3, 5 & 10, Large, Clone
(With Spare Disk can be assigned to any RAID group)
LED Display for Tray

Power on- white
HDD Access- flashing blue
HDD Failure - Red

LED Display for Enclosure

Power on LED - white
FAN normal – green; fail – red
TEMP normal – green; over 50°C – red

Dimension

230(D) x 157(W) x 229(H) mm
9(D)  x 6.1(W) x 9(H) inch

MaterialStylish Aluminum with solid metal construction
Power Supply220W (High reliability of IPC form-factor)
Input: 100 – 240 VAC, 50- 60 Hz
Output: +5V and +12V DC
Cooling

One 90 x 90 x 25 mm Cooling Fan

O.S. supportOS Independent
GUI supportWindows, Mac OS, Linux
Operating Temperature0 to 40°C  (32 to 104°F)
Storage Temperature-10 to 50°C  (-14 to 122°F)
Relative Humidity20 to 80% (non-condensing)
   Performance Benchmark
NR710C Performance Benchmark
 
System Note
 1. Operating systems that allow disk volume larger than 2 Terabytes
     (2048 Gigabytes) include:
   
     a. Windows Vista, Windows 7, and Windows Server 2008
    b.  Mac OS 10.4/10.5 or higher
    c.  Linux 2.6.23 or higher

 2. If you want to use multiple RAID volumes on eSATA interface, your system should
    
meet either of the following requirements (Both USB3.0 & FW800 interfaces no              limitation here).   

    a. The motherboard's eSATA port should support Port Multiplier function.
    b. The system should have an internal eSATA card with Port Multiplier function.
 
Package Content

Enclosure x 1
HDD Tray x 5
USB 3.0 Cable x 1
FireWireB to FireWireB cable x1
eSATA cable x1
Power Cord x 1
Manual CD-ROM x1
Hard Disk Drive mounting screw x 20
Key for HDD tray x 2

Ordering Information
 Model No.Description
 

NR710C

Desktop 5 bay SATA to USB3.0/ FWB/eSATA Combo interface RAID Subsystem, Black color front panel and tray, with 220W single power supply
ANNA920C0340

Spare Black Color Tray with Retail Package for NR710C

 

NR710C-W

Desktop 5 bay SATA to USB3.0/ FWB/eSATA Combo interface RAID Subsystem, White color front panel and tray, with 220W single power supply
ANNA920C0350

Spare White Color Tray with Retail Package for NR710C-W.

back Back to Top